The Enable-IT™ 375 75W - 56VDC Power over Ethernet Plus Injector is single port IEEE 802.3at compliant Midspan solution that is a compact and easy to install with RJ-45 Ethernet cabling. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.

The Enable-IT 375 Gigabit Power Over Ethernet Plus Injector can be used with the Enable-IT 380 PoE Range Extender/s to drive your full PoE strength up to 7,200ft.

The 375 unit is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3at compliant device, the Enable-IT 375 56VDC Power over Ethernet Plus Injector uses 4 wires in a category rated wiring bundle, i.e. CAT5e run. As will all PoE voltage drops over distance. As a rule of thumb you will lose 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring. The Enable-IT 375 is a 75W-56VDC high power injector to maximize your distance and output.

• Can be used in conjunction with Enable-IT 380 PoE Range Extender/s up to 7,200ft.
  
• 10/100/1000 Gigabit PoE compatible
• 75W - 56 VDC 802.3at compliant high power PoE Plus Injector uses existing Ethernet cabling for strong output for your PoE devices.
• Over Voltage/Current, Short Circuit Protection Outputs equipped with short circuit protection and overload protection as per 802.3at specification except max average current is 0.55A, Peak 0.6A per pair
• Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
• Quick install RJ-45 connection to infrastructure for data input and PoE/data output.
• This kit includes the following:
  • (1) 375 75W-56VDC PoE Plus injector
  • (1) US Type B 120VAC power cord
  • (1) Enable-IT 375 PoE Plus Injector Manual

Power

5v - 2A DC country specific AC switching wall adapters included. (120 - 260VAC)

Data Rate

100Mbps full-duplex Ethernet Data & with simultaneous Voice transmission

Interface

Ethernet: (4) LAN RJ-45 Standard 10/100 Base-TX autosensing ports
Voice/Data Line: RJ-11 - Dual line dongles provided

Dimensions

Height 1.5" (38mm)  Depth 3.75" (95 mm)  Width 5.75" (146mm)

Environment

Operational Temperature: -49°F to 168°F (-45°to 76°C)
Humidity: 5% to 95%, non-condensing

Enclosure

Square wallmount plastic casing with Telco / Network port runs 25% cooler than any metal casing competitor