|
|
 |
Enable-IT 828 - Gigabit Full Duplex Ethernet Extender
Price: $285.00
This item is in stock
Brief Description
Detailed Description
Specifications
Unpowered Gigabit Ethernet Extender. Use your PoE Midspan or Injector to power up to (2) daisy-chained 828 Gigabit Ethernet extenders and power a remote device up to 1,200ft/360m away
Features
- Extends standard Gigabit Ethernet Full Duplex 6 times beyond the IEEE barrier of 328ft or 100m with PoE+ 56V over CAT5e/6
- Three port design allows for deployment of (2) separate PoE IP Cameras or devices up to 1,200ft/360m
- DIP switch selection enables you to turn on or off the PoE output for each port.
- Rapid LAN style installation RJ45 LAN Interfaces - no programming required.
- Cisco / Motorola reverse polarity PoE compatible
- Daisy chain up to (2) 828’s to 360m or 1,200ft
- Ideal for deploying High Def IP Cameras requiring Gigabit throughput at distance.
- Supports VoIP (Voice over IP).
- Network Equipment independence - Transparent to protocols, applications and MAC addresses.
- Sustained full-duplex service delivery end to end.
- You supply the PoE or can be used Enable-IT 360 PoE+ 50W-60V Injector.
Product Description
The Enable-IT™ 828 Gigabit Ethernet Extension Unit is the world’s First copper Gigabit solution in the industry today. This unit is a standalone kit and can be used without the power adapter with your PoE Injector or PoE Midspan. The standalone 828 can drive incremental Gigabit Ethernet to 240m or 800ft. This cost effective unit blows away any previous solution including fiber for very quick plug and go installation of PoE IP cameras, PoE Access Points and remote LAN segments.
The Enable-IT 828 can drive industry standard Gigabit Ethernet signals to over six times the restricted IEEE standard Ethernet distance when combined in a series of multiple units and uses high power PoE+. This cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today.
The 828 Series Solution is a standalone powered Gigabit Ethernet Repeater that doubles the range of your Gigabit Ethernet to an unpowered remote location. This is ideal for installing high powered PoE+ cameras remotely using only a CAT5e or CAT6 rated 100m cabling. Selectable DIP switches allow for disabling PoE output on either ouytput port to enable standard non PoE LAN devices such as a laptop to configure an IP camera. You can also daisy chain (2) 828 units to reach 360m / 1,200ft to power a 48v PoE device easily.
Highlights
- Extreme Broadband throughput for delivering Voice, Data, Video over CAT 5/6 cabling with 60V PoE+
- Longest warranty protection included exceeding any knockoff competitors.
- Enables Gigabit Ethernet & PoE+ connectivity to LAN’s at a fraction of the previously costly fiber options
- Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
- Quick install RJ-45 connection to LAN standard infrastructure
- Optimal Design for installing High efinition PoE IP Cameras up to 610m distance
- Enable-IT 828 - Includes the following:
- (1) Enable-IT 828 Gigabit & PoE+ Ethernet Extender Unit
- Optional 828P PoE+ powered Kit This kit includes the following:
Specifications
- Power
- 5v Self Powered from PoE Input
- Data Rate
- 1000mbps full-duplex Ethernet Data & PoE (802.3af) or PoE+ (802.3at)
- Interface
- Ethernet: (3) LAN RJ-45 Standard 10/100/1000 Base-TX autosensing ports
- Dimensions
- Height 1.4" (38mm) Depth 2" (60mm) Width 3" (85mm)
- Environment
- Operational Temperature: -49°F to 168°F (-45°to 76°C)
- Humidity: 5% to 95%, non-condensing
- Enclosure
- Ruggedized metal wallmount casing with Triple Gigabit LAN Network ports
|
Manufacturer:
N/A
| | SKU: |
N/A
|
E-mail a friend about this item.
|
